Additional Resources

 

Right here down the page you might get lots of awesome data around What Would Cause My Electric Water Heater to Stop Working?.

Several contemporary residences use an electric water heater for their heating system, as a result of its convenience and also convenience of use. Nevertheless, similar to any other electric home appliances, problems might emerge with its use, suddenly. It can be really frustrating to wake up to a cool shower as opposed to a hot one or having your bath with water that isn't warm adequate or perhaps as well hot. Whatever the case might be, hot water heater issues can be rather nerve-racking. Fortunately, we've made a checklist of feasible options to your water heater issues. There are a variety of elements that could create much of these issues, it could be a problem with the power supply, the electrical heating element, or the thermostat. Prior to doing anything, guarantee you shut off the major power supply for safety. Whatever the trouble is, getting it repaired should not posture way too much of a problem if you follow these steps:

 

Check Your Power Supply:

As fundamental as this may seem, it is extremely necessary. Without appropriate power, your water heater will not function. So the first thing to do when your water all of a sudden stops working is to confirm that it isn't a power issue. Check if the fuse is blown out or the circuit breaker stumbled. If the breaker is the issue, merely transform it on and off once again. Change any broken or worn-out fuse. Evaluate the device with power after these modifications to see if it's now functioning.

 

Examine the Heating Element in the Hot Water Heater:

If it's not a power problem, after that attempt looking into your heating element if it is still working. Examine each of your heating elements to make sure the trouble isn't with any one of them. If any one of them is faulty, replace that component and after that check whether the warm water is back on.

 

Inspect Your Thermostat:

If your water heater still isn't functioning or the water coming out isn't warm enough, you might require to examine the temperature level settings on your upper thermostat. Guarantee the circuit breaker is switched off before doing anything. Open the access panel as well as press the red switch for temperature reset above the thermostat. This must aid warm the water. Turn the breaker back on and inspect if the issue has actually been dealt with.

 

Call A Specialist:

If after changing all defective parts and resetting your temperature, the water heater still isn't functioning, you might require to get in touch with a professional plumber for a specialist opinion. The issue with your heating system could be that the cold and hot faucets have been switched or it may be undersized for the amount of hot water needed in your house. Whatever the case might be, a specialist plumber would certainly help resolve the issue.

 

Final thought

Water heater issues are not always significant. A lot of them are because of small issues like a blown fuse or worn-out burner. Changing the faulty components need to work. Nevertheless, if you are still not able to fix the trouble, give a call to your local plumber to come to get it repaired.

 

Common Reasons Why Your Hot Water Heater Isn’t Working

 

Water Gets Too Hot

 

Ouch! You wanted a hot shower, not boiling! If you have a newer model electric water heater, your water heater works with a thermostat (actually, two thermostats). If this thermostat has been jostled — or purposely reset — by someone in your home, the water flow will be much hotter than you expected.

FIX: Adjust the thermostat to a more moderate setting for producing hot water. Forty-nine degrees Celsius is recommended to prevent scalding.

 

Water Doesn’t Get Hot

 

This is the opposite of the previous problem, but it’s almost as bad. Your flow of hot water is merely lukewarm or even incoming cold water. Once again, an incorrect thermostat setting, or a faulty thermocouple in a gas water heater, could be to blame. Another explanation might be that there’s no power to the water heater (in the case of an electric heater) or the pilot light has gone out (if you have a gas unit).

FIX: Adjust your thermostat as necessary. If that doesn’t do the trick, check the power supply. Another possibility is the replacement of a damaged thermocouple in gas water heaters.

 

Leaking Water Heater

 

A leaking water heater (a sign may be low hot water pressure, or not enough hot water to shower) might be a reason to push the panic button… but first, take a few minutes to check where the leakage is coming from. Leaks near the top of the heater tend to indicate a problem with a valve, which won’t need a major repair. However, a leak from the water heater base is more serious.

FIX: You may need a qualified plumber to replace your drain valve or TPR (temperature pressure relief) valve. When your water heater is leaking from below, your plumber might be able to fix it if you call them soon enough. Otherwise, you will need to have a new water heater installed.

 

Noisy Water Heater

 

Sometimes your water heater might make some peculiar noises, loud enough to compete with your singing in the shower. Are these a cause for alarm? It depends on exactly what kind of sounds you are hearing. Sizzles and rumbles are both red flags, indicating a heavy sediment buildup in your hot water tank that might cause a breakdown in the near future. In addition, banging is a sign of a water hammer, which can lead to serious damage to your pipes.

FIX: To stop sizzling or rumbling, turn off the tank and have it flushed by a reliable plumbing company ASAP. Ask your plumber to install a water hammer arrestor to quiet down the banging and save the pipes.

 

Pilot Light Keeps Going Out

 

Many pilot lights go out once in a while, but when your water heater pilot light keeps going out continually, it’s a problem. And the chances are good that that problem stems from either a shortage of combustible air or a malfunctioning thermocouple.

FIX: Increase the air supply around your water heater by cleaning dust and lint off the appliance and clearing any clutter from the area around it. A bad thermocouple will require expert plumbing repair and is more than basic gas water heater troubleshooting.

 

Water Smells Bad

 

The water from your residential plumbing pipes should smell neutral. If it has a strong unpleasant odour, something’s wrong. To check whether your water heater is at fault, turn on a hot water faucet and let it run for a few minutes. And, yes, use your nose to determine exactly what you are smelling.

FIX: For a garlicky odour, relight the pilot light on your water tank. When you detect the scent of garbage, you’ll need a professional plumber to flush the hot water tank and possibly replace the anode rod. A strong smell of rotten eggs could signal a hazardous gas leak; turn off the gas supply if possible, get everyone out of your house, and make an emergency call to the gas company.

 

Water Looks Brown Or Rusted

 

The first thing to do is ask yourself, “Is the brown, rusty-looking water coming only from my hot water taps?” If the answer is yes, then most likely, either the anode rod or the water heater interior is starting to rust, especially if your hot water heater is nearing the end of its life expectancy. (A “no” answer means the issue does not originate from the hot water heater but rather from the water supply.)

FIX: Contact a plumber to inspect the water heater. If you catch the problem quickly enough, it might be fixable. Otherwise, you’ll need a water heater replacement. Consider installation of an efficient new tankless water heater.

https://www.huskyair.com/blog/hot-water-heater-isnt-working/

 

I was introduced to that write-up about What Would Cause My Electric Water Heater to Stop Working? from a good friend on our other blog. Sharing is nice. Helping others is fun. Thanks a lot for taking the time to read it.

Find Out More